EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Demand Controller is a remarkably efficient photo voltaic controller created for off-grid photo voltaic programs. According to multiphase synchronous rectification know-how, it assures optimized energy conversion and method security for an array of photovoltaic (PV) purposes.
Important Characteristics on the EPEVER Tracer AN Series Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technological innovation for remarkable solar Vitality harvesting. Important characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Twin-Stage Charging for Improved battery existence.
LCD Display screen with serious-time data checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all components are included: Tracer AN device, temperature sensor, interaction cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always observe suitable security protocols and ensure the system is powered off in advance of connecting parts.
Action 1: Connect the battery terminals towards the demand controller (constructive to optimistic, unfavorable to destructive).
Action 2: Join the photo voltaic panel array for the PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Move four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power over the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Click Here Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, light Command.
5. Monitoring and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring using the MT50 remote meter.
Info can be logged by means of the RS485 conversation port making use of software for instance Solar Station Computer system.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Modify program parameters if needed.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification know-how ensures:
Better Efficiency: Diminished energy losses for the duration of conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Excellent option for optimizing solar energy generation and increasing battery everyday living. By subsequent the above mentioned set up guide, end users can assure optimum effectiveness and process longevity.